Frederick, MD Attic Moisture Issues


Frederick, MD attic moisture problems can lead to mold, mildew, or other biological growth. The lack of proper attic ventilation fosters attic mold growth by allowing moisture to become trapped in the attic. Moldy Frederick attic conditions can potentially cause rot, structural damage, and a variety of health problems for susceptible individuals.

What causes attic moisture in Frederick?

  • Improper mechanical ventilation- Dryer vents, plumbing vents, kitchen vents and bathroom vents should always be exhausted to the exterior of the building. When these vents are not exhausted properly, moist air is deposited into the attic, raising the humidity, and potentially causing attic mold growth.

Attic Moisture Issues Frederick, MD

  • Lack of proper attic ventilation or attic insulation – In cooler climates, or just winter months in general, warm, moist air enters our attics from the living space below and clashes against the cool roof decking and framing, resulting in condensation or even interior frost in attic. This repeated and sustained wetting of the wood encourages attic mold growth. Attic ventilation systems help control the attic moisture, temperature and humidity by exhausting the moist air, eliminating the potential for condensation or frost in attic.

How do I eliminate my Frederick, MD attic mold issue?

When addressing any interior mold issue, the attic moisture source must be addressed to provide a long term solution. The key to eliminating attic mold is controlling the moisture in attic. AdvantaClean of Frederick experts can help diagnose your attic moisture and attic mold issues by properly recommending and implementing an attic ventilation system or other corrective measures.

Frederick Attic Moisture SolutionsHow can I achieve proper Frederick, MD attic ventilation?

  • Adding insulation
  • Sealing leaky duct work
  • Extending bathroom or kitchen vents or ducting to the exterior of the home
  • Increasing ventilation through installing active or passive attic ventilation systems

Attic ventilation systems reduce attic moisture and attic mold problems!
To prevent or Repair a Moldy Attic, Call AdvantaClean at (301) 281-4902

Frederick, MD Basement moisture control Issues?

AdvantaClean of Frederick can help with basement moisture problems too!
Poor ventilation allows moisture to become trapped in the attic, potentially causing attic mold growth. As with any interior mold issue, addressing the moisture source is key. AdvantaClean experts will diagnose your attic moisture and mold issues. They'll recommend and implement corrective measures and make sure ventilation is no longer inadequate.

Attic Moisture Issues? Call AdvantaClean of Frederick, your Frederick, MD Attic Moisture Control Specialists! (301) 281-4902

We provide the residents of Frederick, with the warm customer care of a local business and the skilled service of a national franchise. AdvantaClean has been improving its work continuously throughout its more than 20-year history.

Call us to set up a consultation (301) 281-4902!

The AdvantaClean Promise to You

  • Handshake Icon Always Exceed
  • Cogs Icon Demonstrate
    Technical Competence
  • 24/7 Icon 24/7 Emergency
  • Arrow Icon Always
  • Handyman Icon Serve
    with Professionalism
  • Sparkle Icon Make Your Home
    Safe, Clean & Healthy