ADVANTACLEAN OF HOLLYWOOD, AVENTURA, & PEMBROKE PINES ARE YOUR HOME RESTORATION EXPERTS IN PEMBROKE PINES, FL
AdvantaClean of Hollywood, Aventura, & Pembroke Pines loves to service the Pembroke Pines area because it is a common place do mold remediation, air duct cleaning, and water damage in.
Pembroke Pines, FL Case Studies
WILD FORREST- HOME FOR CLOSURE MOLD REMOVAL
Problem: This home was in foreclosure and was in very bad shape and presented microbial activity in 7 rooms. Source of damage was a roof leak on east wall that affected all the room in the area. The home was also uninhabited with high relative humidity. Mushrooms were coming out of the baseboards. When the laminate floors were removed the AdvantaClean crew noticed tree roots under the flooring. This came from an outside tree. A lot of debris was going to be removed from the home.
Solution: We stated by room and worked our way thorugh the home treating each affected area. The proper procedures were taken and we encapsulated with Foster 40-20 to prevent mold growth from coming back. We recommended that plants were transplanted to at least 5ft away from home to prevent this from reoccurring. A nice job to test our remediation skills and protocol.
COMMERCIAL HARDWARE RETAIL AIR DUCT CLEANING
Problem: AdvantaClean was called because a well known Commercial Hardware store was presenting visible mold stains. The source of the problem was evidently a water filtration on the roof of the building. Once this filtration was repaired a mold remediation was necessary. Also the air ducts had to be cleaned. The area were AdvantaClean crew will be working was the employees break room, there for the challenge was not to disturb them.
Solution: AdvantaClean began by removing contaminated materials from the area, and then wiping down with micro-ban an antimicrobial to prevent mold growth in the future. After this was performed we proceeded with the air duct cleaning: All interior components of the air handler were cleaned in-place. All mechanical or machined components were maintained for corrosion by removing loose rust and scale. Following the completion of the mechanical cleaning process, a residual antimicrobial treatment shall be applied to the interior of the duct work. Anti-microbial solutions will be applied. This whole process was done by keeping in mind the employees safety and also informing them every step of the way, they were very nice and understanding to work with.