Air Ducts, Coils & Dryer Vent Cleaning
Air Ducts, Coils & Dryer Vent Cleaning Services
Regular air duct cleaning eliminates mold and other contaminants from your heating and air conditioning systems and improves your indoor air quality.
Avoid fire hazards with our professional dryer vent cleaning services. Clogged dryer vents can pose significant risks, but regular cleaning helps maintain a safe and efficient home environment.
-
Air Duct and Vent Cleaning are a means of improving your home's indoor air quality. Air Duct cleaning refers to the cleaning of heating and cooling system components of forced air systems, including the supply and return air ducts and registers, grilles and diffusers, heat exchangers heating and cooling coils, condensate drain pans (drip pans), fan motor and fan housing, and the air handling unit housing.
Failure to clean all components of the system can result in the re-contamination of the entire system, thus minimizing the benefits of cleaning.
Just as you wouldn’t clean only half of your living room floor, you also would not want to clean only part of your home’s HVAC system. National Air Duct Cleaners Association (NADCA) recommends cleaning the entire HVAC system, including the following components with the proper air duct cleaning tools:
- Air Ducts
- Coils
- Drain Pan
- Registers
- Grills
- Air Plenum
- Blower Motor and Assembly
- Heat Exchanger
- Air Filter
- Air Cleaner
There are two key components to HVAC cleaning: breaking contaminants loose, and collection of contaminants. Typically, a service provider will use specialized tools to dislodge dirt and other debris in ducts, then vacuum them out with a high-powered vacuum cleaner.
-
The short answer: Yes. At some point in every homeowner’s life, it’s important to clean your air vents and air ducts, as they directly affect the air quality, circulation and even the energy usage in your home.
According to the NADCA, dirty air ducts can contribute to health issues like respiratory infections, autoimmune disorders or allergies because they can circulate contaminants and air pollutants throughout the home five to seven times per day.
-
Make sure there is space cleared around the HVAC system and the duct registers inside your home. Once that is done, the best thing you can do is stay out of the way to ensure your safety and allow the technician to complete the cleaning.
-
Heating, ventilation, and air conditioning (HVAC) systems have been shown to be a collection source for a variety of contaminants that have the potential to affect health, such as mold, fungi, bacteria, and particles of dust. The removal of such contaminants from the HVAC system and home should be considered as one component in an overall plan to improve indoor air quality.
-
Frequency of cleaning of air ducts depends on several factors, including:
- Amount of people experiencing allergies or asthma symptoms when indoors
- Number of pets that shed high amounts of hair and dander
- Evidence of water damage or contamination to the home or HVAC system
- The severity of allergies or asthma symptoms
- After home renovations or remodeling
- Smokers in the household
- History of a home (schedule air duct cleaning before you move into a new home)
-
The most effective method of cleaning air ducts is through “Source Removal.” This requires a contractor to place the system under negative pressure through the use of a specialized, powerful vacuum. While the vacuum draws air through the system, devices are inserted into the ducts to dislodge any debris that might be stuck to interior surfaces. The debris is pulled into the vacuum and removed from the system and the home.
-
Antimicrobial chemicals are applied by some companies to the interior surface of the air ducts to treat microbial contamination such as fungi (mold), viruses or bacteria. Before any antimicrobial chemicals are used, the system should be thoroughly cleaned. It is critical that any antimicrobial treatment used in your system be registered by the U.S. Environmental Protection Agency (EPA) specifically for use in HVAC systems. The use of antimicrobial chemicals is considered additional and not part of a typical cleaning of air ducts.
-
- Verify that the company is certified by NADCA to perform proper cleaning of air ducts, is a member in good standing and properly insured.
- Make sure that the company is going to clean and visually inspect all of the air ducts and related system components.
- Ask if the company has the right equipment to effectively perform cleaning of air ducts and if the company has done work in homes similar to yours. Get references from neighbors if possible.
- Avoid advertisements for “$99 whole house specials” and other sales gimmicks.
-
The U.S. EPA says that “duct cleaning services typically – but not always – range in cost from $450 to $1000 per heating and cooling system, depending on the services offered, the size of the system to be cleaned, system accessibility, climatic region, and level of contamination.” The type of duct material is also taken into consideration.
Consumers should beware of air duct cleaning companies that make sweeping claims about the health benefits of cleaning air ducts – such claims are unsubstantiated. Consumers should also beware of “blow-and-go” air duct cleaning companies. These companies often charge a nominal fee and do a poor job of cleaning air ducts. These companies may also persuade the consumer into unneeded services with and/or without their permission.
-
NADCA does not endorse one kind of equipment over another. There are two main types of vacuum collection devices: (1) those mounted on trucks and trailers and (2) portable units. Truck/trailer mounted equipment is generally more powerful than portable equipment. However, portable equipment can often be brought directly into a facility, allowing the vacuum source to be located closer to the ductwork. Both types of equipment will clean to NADCA standards.
All vacuum units should be attached to a collection device for safe containment prior to disposal. Any vacuum collection device which exhausts indoors must be HEPA filtered.
A vacuum collection device alone will not get an HVAC system clean. The use of methods and tools designed to agitate debris adhered to the surfaces within the system, in conjunction with the use of the vacuum collection device(s), is required to clean HVAC systems. (For example, brushes, air whips and “skipper balls.”)
-
The best way to determine if the air duct cleaning was effective is to perform a visual inspection of the system before and after cleaning. If any dust or debris can be seen, the system should not be considered cleaned. While you can perform your own visual inspection using a flashlight and mirror, a professional cleaning contractor should be able to allow you better access to system components and perhaps the use of specialized inspection tools. In addition, following this post-cleaning checklist can help to ensure a top-quality job.
-
The amount of time it takes to clean a residential HVAC system depends on many variables such as the size of the home, the number of systems, the extent of the contamination and the number of HVAC cleaners performing the job. Ask at least two contractors to inspect your system and give you a time estimate. This will give you a general idea of how long the job should take as well as an idea of how thoroughly the contractor plans to do the job.
-
NADCA Members have signed a Code of Ethics stating they will do everything possible to protect the consumer and follow NADCA Standards for cleaning to the best of their ability. For a list of NADCA members near you, click here. Air duct cleaning companies must meet stringent requirements to become a NADCA Member. Among those requirements, all NADCA Members must have certified Air System Cleaning Specialists (ASCS) on staff, who have taken and passed the NADCA Certification Examination. Passing the exam demonstrates extensive knowledge of HVAC design and cleaning methodologies. ASCSs are also required to further their industry education by attending seminars in order to maintain their NADCA certification status.
